SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2004FOCUS ZX3, 2.3 Z, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCETESTING & DIAGNOSISENGINE CONTROLS - POWERTRAIN DTC CHARTS & DESCRIPTIONS - CNG, FLEX-FUEL & GASOLINEDIAGNOSTIC TROUBLE CODE (DTC) CHARTSP0207: CYLINDER NO. 7 INJECTOR CIRCUITS
2004 Ford Focus ZX3, 2.3 Z, Standard

P0207: Cylinder No. 7 Injector Circuits

2004 Ford Focus ZX3, 2.3 Z, StandardSECTION P0207: Cylinder No. 7 Injector Circuits
P0207 - CYLINDER NO. 7 INJECTOR CIRCUITS

Description:  See the description for DTC P0201.
Possible Causes: 
  • Faulty fuel injector driver within the PCM.
Diagnostic Aids:  PID Data Monitor INJ7F fault flags = YES.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
Dedicated NGV GO to PINPOINT TEST HA: NATURAL GAS FUEL CONTROL Step 27. GO to PINPOINT TEST HA: NATURAL GAS FUEL CONTROL Step 27. GO to PINPOINT TEST HA: NATURAL GAS FUEL CONTROL Step 27.
All others GO to PINPOINT TEST H: FUEL CONTROL Step 41. GO to PINPOINT TEST H: FUEL CONTROL Step 41. GO to PINPOINT TEST H: FUEL CONTROL Step 41.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.