Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2004EXPLORER 2WD V6-4.0L VIN EREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER HEAD ASSEMBLYVALVE GUIDE
2004 Ford Explorer 2WD V6-4.0L VIN E
Valve Guide
2004 Ford Explorer 2WD V6-4.0L VIN ESECTION Valve Guide
Valve guide bore diameter 7.00-7.018 mm (0.276 inch)
Valve stem diameter-intake 6.965-6.98 mm (0.274-0.275 inch)
Valve stem diameter-exhaust 6.95-6.965 mm (0.27-0.274 inch)
Valve stem-to-guide 0.020-0.053 mm
clearance-intake (0.001-0.002 inch)
Valve stem-to-guide 0.035-0.068 mm
clearance-exhaust (0.001-0.003 inch)
Valve stem diameter-intake 6.965-6.98 mm (0.274-0.275 inch)
Valve stem diameter-exhaust 6.95-6.965 mm (0.27-0.274 inch)
Valve stem-to-guide 0.020-0.053 mm
clearance-intake (0.001-0.002 inch)
Valve stem-to-guide 0.035-0.068 mm
clearance-exhaust (0.001-0.003 inch)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.