Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2004EXCURSION 2WD V10-6.8L VIN SREPAIR AND DIAGNOSISMAINTENANCESERVICE INTERVALSSEVERE SERVICE39000 MI OR 62400 KM
2004 Ford Excursion 2WD V10-6.8L VIN S
39000 MI or 62400 KM
2004 Ford Excursion 2WD V10-6.8L VIN SSECTION 39000 MI or 62400 KM
Lubricate
Control Arm
If using Special Operating Conditions I. Refer to Special Operating Conditions (Read This First). Lube front lower control arm and steering linkage ball joints with zerk fittings, if equipped.
Replace
Oil Filter, Engine
Replace oil filter if using Special Operating Conditions T, I, or D only.
Engine Oil
Replace oil if using Special Operating Conditions T, I, or D only.
Control Arm
If using Special Operating Conditions I. Refer to Special Operating Conditions (Read This First). Lube front lower control arm and steering linkage ball joints with zerk fittings, if equipped.
Replace
Oil Filter, Engine
Replace oil filter if using Special Operating Conditions T, I, or D only.
Engine Oil
Replace oil if using Special Operating Conditions T, I, or D only.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.