Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2004EXCURSION 2WD V10-6.8L VIN SREPAIR AND DIAGNOSISBODY AND FRAMEGRILLESERVICE AND REPAIRPROCEDURES
2004 Ford Excursion 2WD V10-6.8L VIN S
Procedures
2004 Ford Excursion 2WD V10-6.8L VIN SSECTION Procedures
RADIATOR GRILLE
REMOVAL
1. Remove the screws.
2. Release the lower retainers.
3. Remove the radiator grille.
INSTALLATION
1. Position the radiator grille in the grille opening.
2. Secure the radiator grille retainers by pushing into place.
3. Install the screws.
REMOVAL
1. Remove the screws.
2. Release the lower retainers.
3. Remove the radiator grille.
INSTALLATION
1. Position the radiator grille in the grille opening.
2. Secure the radiator grille retainers by pushing into place.
3. Install the screws.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.