Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2004ESCAPE 2.0 BREPAIR AND DIAGNOSISSTEERINGMANUAL STEERINGSTEERING SYSTEM - GENERAL INFORMATIONSPECIFICATIONSGENERAL SPECIFICATIONS CHART
2004 Ford Escape 2.0 B
General Specifications Chart
2004 Ford Escape 2.0 BSECTION General Specifications Chart
General Specifications Chart
| Item | Specification |
|---|---|
| Lubricants | |
| Motorcraft MERCON® Multi-Purpose ATF Transmission Fluid XT-2-QDX | MERCON® |
| Power Steering Gear | |
| Turning effort | 30 Nm (6.75 lb) |
| Power Steering Purge Vacuum | |
| Vacuum | 68-85 kPa (20-25 in/hg) |
| Power Steering Pump | |
| Flow | 6-8.25 liters/minute (1.79-2.19 gpm) Fluid 74o-80°C (165o-175°F) Engine at idle |
| Pressure | 414 kPa (60 psi) Fluid @ 74°-80°C (165°-175°F) Engine at idle |
| Minimum capacity | 4.4 liters/minute (1.15 gpm) Fluid @ 74°-80°C (165°-175°F) Engine at idle Pressure at 5,171 kPa (750 psi) |
| Relief pressure | 8,964-10,205 kPa (1,300-1,480 psi) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.