SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2004ECONOLINE E150, VAN CARGO, 4.6 WREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 544 (INTERIOR LIGHTING)DIAGNOSIS AND TESTINGINTERIOR LIGHTINGSYMPTOM CHART
2004 Ford Econoline E150, Van Cargo, 4.6 W

Symptom Chart

2004 Ford Econoline E150, Van Cargo, 4.6 WSECTION Symptom Chart
WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
INTERIOR LIGHTING SYMPTOM CHART

Condition Possible Sources Action
  • The interior lamps are inoperative
  • Fuse
  • Circuitry
  • Battery saver relay
  • Interior lamp relay
  • Instrument cluster
  • Headlamp switch
  • The interior lamps stay on continuously
  • Circuitry
  • Door ajar switch
  • Headlamp switch
  • Instrument cluster
  • Vehicle security module
  • An individual interior lamp is inoperative
  • Lamp assembly
  • Circuitry
  • The interior lamps do not turn on with one door open
  • Door ajar switch
  • Circuitry
  • Instrument cluster
  • The demand lighting is inoperative
  • Circuitry
  • OPEN a door. If the interior lamps operate correctly, REPAIR circuit 54 (LG/YE) for an open. TEST the system for normal operation. If the interior lamps do not operate correctly, GO to PINPOINT TEST A .
  • An individual demand lamp is inoperative
  • Lamp assembly
  • Circuitry
  • The battery saver does not deactivate after time-out
  • Battery saver relay
  • Circuitry
  • Instrument cluster
  • All battery saver components do not operate
  • Circuitry
  • OPEN a door. If the interior lamps operate correctly, REPAIR circuit 54 (LG/YE) for an open. TEST the system for normal operation. If the interior lamps do not operate correctly, GO to PINPOINT TEST A .
  • The illuminated entry is inoperative when using the remote transmitter
  • Circuitry
  • Instrument cluster
  • Vehicle security module
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.