Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2004ECONOLINE E150, VAN CARGO, 4.6 WREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 343 (HVAC - CLIMATE CONTROL SYSTEM)DIAGNOSIS AND TESTINGCLIMATE CONTROL SYSTEMDIAGNOSTIC TROUBLE CODE INDEX
2004 Ford Econoline E150, Van Cargo, 4.6 W
Diagnostic Trouble Code Index
2004 Ford Econoline E150, Van Cargo, 4.6 WSECTION Diagnostic Trouble Code Index
WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
All DTCs can be retrieved as an on-demand (hard fault) or continuous (intermittent fault) fault. If a continuous (intermittent) fault, the degrees Celsius symbol (°C) will be displayed in addition to the DTCs.
DUAL/ELECTRONIC AUTOMATIC TEMPERATURE CONTROL (DATC) MODULE DIAGNOSTIC TROUBLE CODE (DTC) INDEX
| DTC | DATC DTC displayed | Notes | Description | Action to Take |
|---|---|---|---|---|
| B2266 | 2266 | N/A | LH blend door failure or short | GO to PINPOINT TEST A . |
| B2267 | 2267 | DATC Only | RH blend door failure or short | GO to PINPOINT TEST A . |
| B1251 | 1251 | N/A | A/C in-vehicle temperature sensor open circuit | GO to PINPOINT TEST B . |
| B1253 | 1253 | N/A | A/C in-vehicle temperature sensor circuit short to ground | GO to PINPOINT TEST B . |
| B1255 | 1255 | N/A | A/C ambient temperature sensor open circuit | GO to PINPOINT TEST C . |
| B1257 | 1257 | N/A | A/C ambient temperature sensor circuit short to ground | GO to PINPOINT TEST C . |
| B1259 | 1259 | N/A | A/C solar radiation sensor open circuit | GO to PINPOINT TEST D . |
| B1261 | 1261 | N/A | A/C solar radiation sensor circuit short to ground | GO to PINPOINT TEST D . |
| B2268 | 2268 | N/A | Steering wheel control switch open circuit | GO to PINPOINT TEST E . |
| B2269 | 2269 | N/A | Steering wheel control switch circuit short to ground | GO to PINPOINT TEST E . |
| B2477 | N/A | N/A | Module not configured | Configure DATC module. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.