Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2004ECONOLINE E150, VAN CARGO, 4.6 WREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 309 (AUTOMATIC TRANSMISSION)GENERAL PROCEDURESSELECTOR LEVER CABLE ADJUSTMENT
2004 Ford Econoline E150, Van Cargo, 4.6 W
Selector Lever Cable Adjustment
2004 Ford Econoline E150, Van Cargo, 4.6 WSECTION Selector Lever Cable Adjustment
WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
- Rotate the gearshift lever clockwise until it bottoms out (first gear), then rotate it counterclockwise two detents (D position).
- Hang a 1.4 kg (3 lb) weight on the gearshift lever.
- Loosen the clamps and remove the air cleaner tube.
- Remove the air cleaner assembly. For additional information, refer to AIR CLEANER ASSEMBLY .
CAUTION:
Adjust the shift cable only in the D position.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.