Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2004ECONOLINE E150, VAN CARGO, 4.6 WREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 283 (FUEL SYSTEM)SPECIFICATIONSTORQUE SPECIFICATIONS
2004 Ford Econoline E150, Van Cargo, 4.6 W
Torque Specifications
2004 Ford Econoline E150, Van Cargo, 4.6 WSECTION Torque Specifications
WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | N.m | lb-ft | lb-in |
|---|---|---|---|
| Accelerator pedal mounting nuts | 9 | - | 80 |
| Engine appearance cover fasteners | 6 | - | 53 |
| Evaporative emissions canister and bracket mounting bolts | 10 | - | 89 |
| Evaporative emissions canister purge valve mounting nuts | 27 | 20 | - |
| Fuel tank support strap bolts | 35 | 26 | - |
| Exhaust heat shield bolts | 10 | - | 89 |
| Exhaust heat shield nuts | 10 | - | 89 |
| Fuel transfer pump lock ring | 80 | 59 | - |
| Fuel delivery module lock ring | 80 | 59 | - |
| Fuel filler pipe bracket bolts | 9 | - | 80 |
| Fuel line bracket-to-frame bolts | 7 | - | 62 |
| Fuel line bracket-to-transmission bolt (front of transmission) | 61 | 45 | - |
| Fuel filter mounting bracket | 7 | - | 62 |
| Fuel tube shield bolts | 5 | - | 44 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.