Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2004ECONOLINE E150, VAN CARGO, 4.6 WREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 250 (AUTOMATIC TRANSAXLE/TRANSMISSION)SPECIFICATIONSOUTPUT SHAFT BEARING SELECTIVE SHIMS
2004 Ford Econoline E150, Van Cargo, 4.6 W
Output Shaft Bearing Selective Shims
2004 Ford Econoline E150, Van Cargo, 4.6 WSECTION Output Shaft Bearing Selective Shims
WARNING: This page is about a different car, the 2002 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.
OUTPUT SHAFT BEARING SELECTIVE SHIMS SPECIFICATION
| Thickness | Part Number |
|---|---|
| 0.8 mm (0.0315 in) | F3XY-7F405-A |
| 0.84 mm (0.0331 in) | F3XY-7F405-B |
| 0.88 mm (0.0346 in) | F3XY-7F405-C |
| 0.92 mm (0.0362 in) | F3XY-7F405-D |
| 0.96 mm (0.0378 in) | F3XY-7F405-E |
| 1.00 mm (0.0394 in) | F3XY-7F405-F |
| 1.04 mm (0.0409 in) | F3XY-7F405-G |
| 1.08 mm (0.0425 in) | F3XY-7F405-H |
| 1.12 mm (0.0441 in) | F3XY-7F405-J |
| 1.16 mm (0.0457 in) | F3XY-7F405-K |
| 1.20 mm (0.0472 in) | F3XY-7F405-L |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.