Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Child Safety Tether Anchors
SEAT PEDESTAL
SEAT FRAME
Child safety seat tether anchors are located at the following seating positions
- On the seat pedestal of the front passenger seat.
- On the seat pedestal of the second row bucket seats.
- On the seat cushion frame of the three passenger bench seat at the outboard seating positions in the second row.
- On the seat cushion frame of the three passenger bench seat at the center seating positions of the third and fourth rows of seating.
If a child safety seat was in use during a collision, inspect the seat pedestal/seat cushion frame and tether anchor for damage. If damaged, install a new seat pedestal/seat cushion frame and tether anchor, as necessary.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.