Item Description

2004 Ford Econoline E150, Van Cargo, 4.6 WSECTION Item Description
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
ITEM DESCRIPTION

Description Nm lb-ft lb-in
Catalytic converter bracket bolts 25 18 -
Catalytic converter bracket nuts 36 27 -
Crossmember brace bolts 40 30 -
Drain plug 14 - 124
Fill plug 34 25 -
Power Transfer Unit (PTU) cover bolts (1) - - -
PTU  heat shield bolts 11 - 97
PTU  bracket-to-engine bolt 48 35 -
PTU  bracket-to- PTU  bolt 48 35 -
PTU  -to-transaxle bolts 70 52 -
PTU  -to-transaxle bolt (M10) 47 35 -
Transfer case vent tube bolt 14 - 124
(1) Refer to the appropriate procedure(s).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.