2003 Ford ZX2 AutomaticFACTORY OEM SERVICE PROCEDURE

Anti-Lock Brake System (ABS) Module

WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery.
  2. Remove the parts in the order indicated in the following illustration and table.
    Fig 1: Removing Anti-Lock Brake System (ABS) Module Components
    G03200224Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.

Item 3: Anti-Lock Brake System (ABS) Module Removal Note 

  1. Position the battery junction box (BJB) aside.
    1. Release the clips.
    2. Position the BJB aside.
      3. Fig 2: Releasing Clips
      G03200225Courtesy of FORD MOTOR CO.

Item 3: Anti-Lock Brake System (ABS) Module Installation Note 

  1. Use the diagnostic tool to reconfigure the ABS module. For additional information, refer to MODULE COMMUNICATIONS NETWORK .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.