Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2003WINDSTAR BASEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2252 (ENGINE COOLING SYSTEM - (HYBRID))SPECIFICATIONSTORQUE SPECIFICATIONS
2003 Ford Windstar Base
Torque Specifications
2003 Ford Windstar BaseSECTION Torque Specifications
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-in |
|---|---|---|
| Auxiliary coolant pump bolts | 7 | 62 |
| Center support bolt | 10 | 89 |
| Condenser-to-radiator bolts | 10 | 89 |
| Cooling fan bolts | 8 | 71 |
| Coolant pump bolts | 10 | 89 |
| Coolant pump pulley bolts | 20 | 177 |
| Degas bottle-to-bracket bolt | 8 | 71 |
| Degas bottle-to-fender nut | 6 | 53 |
| Hood latch bolts and nut | 9 | 80 |
| Motor Electronics Cooling System (MECS) bolts | 6 | 53 |
| Radiator bracket bolts | 10 | 89 |
| Thermostat housing bolts | 10 | 89 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.