Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Audio Unit Part Number Retrieval
2003 Ford Windstar BaseSECTION Audio Unit Part Number Retrieval
WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The audio unit must be in radio tuner (AM/FM) mode to retrieve the part number.
- Turn the audio unit on.
- Press and hold preset buttons 3 and 6 for 3 seconds. The speaker walk-around test will begin.
- Before the speaker walk-around test is complete, press preset button 6.
- Press the TUNE UP button. This will either directly indicate the part number or it will cause the audio unit to scroll through config 1, config 2, EEPROM, and the part number information.
- If the audio unit scrolls through the information, Step 4 may need to be repeated until the audio unit part number can be recorded.
- Record the audio unit part number.
- Turn the audio unit off.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.