Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2003WINDSTAR BASEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1542 (FUEL TANK & LINES)SPECIFICATIONSTORQUE SPECIFICATIONS
2003 Ford Windstar Base
Torque Specifications
2003 Ford Windstar BaseSECTION Torque Specifications
WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Fuel tank strap bolts | 47 | 35 | - |
| Fuel tank filler pipe bracket nut | 9 | - | 80 |
| Fuel tank filler pipe hose clamp | 4 | - | 35 |
| Fuel tank filler pipe heat shield nuts | 9 | - | 80 |
| Inertia fuel shutoff (IFS) switch mounting bolt | 2 | - | 18 |
| Upper cowl heat shield nuts | 9 | - | 80 |
| Lower cowl shield nuts | 9 | - | 80 |
| Fuel tank filler pipe retaining screws | 2 | - | 18 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.