Torque Specifications

2003 Ford Windstar BaseSECTION Torque Specifications
WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
Battery cable terminal bolt (Escape, Mariner) 7 - 62
Battery cable terminal bolt (Escape Hybrid) 5 - 44
Battery ground cable bolt (2.3L) 25 18 -
Battery ground cable-to-transaxle bolt (3.0L) 9 - 80
Battery hold down nuts 3 - 27
Battery junction box (BJB) terminal nut 8 - 71
Battery tray bolts 9 - 80
Body ground terminal bolt 9 - 80
Generator B+ terminal nut 8 - 71
Starter motor positive cable nut 12 9 -
Starter solenoid wire nut 5 - 44
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.