Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2003WINDSTAR BASEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1214 (ENGINE - 3.0L (4V))IN-VEHICLE REPAIRVALVE COVER RHNOTES
2003 Ford Windstar Base
Valve Cover RH: Notes
2003 Ford Windstar BaseSECTION Notes
WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
Material
| Item | Specification |
| Motorcraft Metal Surface Prep ZC-31 | - |
| Silicone Gasket and Sealant TA-30 | WSE-M4G323-A6 |
| Item | Part Number | Description |
|---|---|---|
| 1 | 14A464 | Positive crankcase ventilation (PCV) valve electrical connector (part of 12A580) |
| 2 | 6K817 | PCV tube |
| 3 | W700497 | Wiring retainer (3 required) |
| 4 | 6C519 | Valve cover stud bolt (10 required) |
| 5 | 6582 | Valve cover |
| 6 | 6584 | Valve cover gasket |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.