2000 Ford Excursion 2WD V10-6.8L VIN SFACTORY OEM SERVICE PROCEDURE

Timing Component Alignment Marks: Locations

Factory service manual diagram



Position the crankshaft with the keyway at the 12 o'clock position.

Factory service manual diagram



If copper links are not visible, mark two links on one end and one link on the other end, and use as timing marks.

Factory service manual diagram



Install the inner crankshaft sprocket with the long hub facing outward.

Factory service manual diagram



Install the inner timing chain on the crankshaft sprocket with the timing marks aligned.

Factory service manual diagram



Install the timing chain on the camshaft sprocket with the two chain links and timing marks aligned.

Factory service manual diagram



- Install the outer crankshaft sprocket and timing chain with the long hub of the crankshaft sprocket facing inward.
- Position the timing chain on the camshaft sprocket. Make sure the two copper-colored links align with the camshaft sprocket timing mark.

Factory service manual diagram



Check for correct alignment of all timing marks.

Factory service manual diagram



Using the index mark on the balance shaft, mark the corresponding gear tooth with chalk.

Factory service manual diagram



NOTE: It may be necessary to use an inspection mirror to see the marks.

Align the chalk mark on the balance shaft with the camshaft timing mark as shown.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.