2000 Ford Contour SVTFACTORY OEM SERVICE PROCEDURE

Restraints Control Module (RCM): Notes

WARNING: This page is about a different car, the 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Improper air bag system operation is possible. Personal injury may result. RCM orientation is critical for proper air bag system operation. If RCM mounting and bracket have been damaged, RCM must be replaced even if air bags have not deployed. Replace or repair any other damaged air bag system components or wiring that are adjacent to RCM.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.