Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1999WINDSTAR BASE, VAN CARGO, 3.8 4REPAIR AND DIAGNOSIS (SINGLE PAGE)EXTERNAL PAGESDIFFERENT CARSECTION 1793 (ENGINE MECHANICAL - 2.5L (HYBRID))ASSEMBLYENGINEFRONT ENGINE BLOCK
1999 Ford Windstar Base, Van Cargo, 3.8 4
Front Engine Block
1999 Ford Windstar Base, Van Cargo, 3.8 4SECTION Front Engine Block
WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
ITEM DESCRIPTION TABLE
| Item | Part Number | Description |
|---|---|---|
| 1 | 6C301 | Accessory drive belt |
| 2 | 6A228 | Accessory drive belt tensioner |
| 3 | 19D629 | Electric A/C compressor |
| 4 | 8501 | Coolant pump |
| 5 | 6K340 | Crankshaft pulley bolt |
| 6 | 6316 | Crankshaft pulley |
| 7 | 6700 | Crankshaft front seal |
| 8 | 6C315 | Crankshaft Position (CKP) sensor |
| 9 | 6019 | Engine front cover |
| 10 | 6K254 | Timing chain tensioner |
| 11 | 6K255 | Timing chain tensioner arm |
| 12 | 6268 | Timing chain |
| 13 | 6K297 | Timing chain guide |
| 14 | 6C271 | Oil pump chain tensioner |
| 15 | 6A895 | Oil pump chain |
| 16 | 6652 | Oil pump drive gear |
| 17 | 6378 | Diamond washer |
| 18 | 6306 | Crankshaft sprocket |
| 19 | 6378 | Diamond washer |
| 20 | 6600 | Oil pump |
| 21 | 6010 | Cylinder block |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.