SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1999WINDSTAR BASE, VAN CARGO, 3.8 4REPAIR AND DIAGNOSIS (SINGLE PAGE)EXTERNAL PAGESDIFFERENT CARSECTION 1246 (MODULE CONFIGURATION)DIAGNOSIS AND TESTINGMODULE CONFIGURATIONINSPECTION AND VERIFICATIONCONFIGURABLE MODULES
1999 Ford Windstar Base, Van Cargo, 3.8 4

Configurable Modules

1999 Ford Windstar Base, Van Cargo, 3.8 4SECTION Configurable Modules
WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The vehicle contains the following modules that are configurable:

  • Audio unit
  • Audio unit with navigation (if equipped)
  • Climate control assembly (electronic automatic temperature control [EATC] module [if equipped])
  • Driver seat module (DSM) (if equipped)
  • Digital signal processing (DSP) module (if equipped)
  • Heated seat module (if equipped)
  • Instrument cluster
  • Restraint control module (RCM)
  • Smart junction box (SJB)
    MODULE CALIBRATION AND PARAMETER INDEX

    Module Calibration Updatable Configurable Programmable Parameter
    Anti-Lock Brake System (ABS) Module No No -
    Audio Unit Yes Yes -
    Audio Unit with Navigation (if equipped) Yes Yes
    • Language
    • Display Units
    Climate Control Assembly (Dual Automatic Temperature Control [DATC] Module [if equipped]) No No -
    Climate Control Assembly (EATC Module [if equipped]) Yes No -
    DDM (if equipped) Yes No -
    DSM (if equipped) Yes Yes Easy Entry/Easy Exit
    DSP Module (if equipped) Yes Yes -
    Heated Seat Module (if equipped) Yes Yes -
    Instrument Cluster Yes Yes -
    Occupant Classification Sensor Yes No -
    PCM Yes No -
    RCM Yes Yes
    • Driver Seat Beltminder
    • Passenger Seat Beltminder
    SJB Yes Yes
    • Auto Locking
    • Auto Unlocking
    • Perimeter Lighting
    • Trim Switch Inhibit
    • Central/2-Stage Toggle
    Transmission Control Module (TCM) 6 Speed Transaxle (if equipped) Yes No -
    TCM FNR5 Transaxle (if equipped) Yes No -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.