Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSFORD1999WINDSTAR BASE, VAN CARGO, 3.8 4REPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESPECIFICATIONSENGINE CONTROLS - SERVICE & ADJUSTMENT SPECIFICATIONSQUICK-SERVICESERVICE INTERVALS & SPECIFICATIONS
1999 Ford Windstar Base, Van Cargo, 3.8 4
Service Intervals & Specifications
1999 Ford Windstar Base, Van Cargo, 3.8 4SECTION Service Intervals & Specifications
REPLACEMENT INTERVALS
| Component | Interval (Miles) (Regular Schedule) | Interval (Miles) (Severe Duty) | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Gasoline Engines | |||||||||||||||
| Air Filter | 30,000 | 30,000 | |||||||||||||
| Coolant | (1) 50,000 | 48,000 | |||||||||||||
| Fuel Filter | 60,000 | (2) 50,000 | |||||||||||||
| Oil & Filter | 5000 | 3000 | |||||||||||||
| PCV Valve | 60,000 | 60,000 | |||||||||||||
| Spark Plugs | (3) 100,000 | 60,000 | |||||||||||||
| Transfer Case Oil | 60,000 | 30,000 | |||||||||||||
| Automatic Trans. | (4) 30,000 | (5) | |||||||||||||
| Manual Trans. | 60,000 | 30,000 | |||||||||||||
| Diesel Engines | |||||||||||||||
| Air Filter | (6) | (6) | |||||||||||||
| Coolant | (1) 50,000 | ..... | |||||||||||||
| Fuel Filter | 30,000 | 15,000 | |||||||||||||
| Oil & Filter | 5000 | 3,000 | |||||||||||||
|
|||||||||||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.