Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1999MUSTANG GT, 2D CONVERTIBLE, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)EXTERNAL PAGESDIFFERENT CARSECTION 2363 (ENGINE MECHANICAL - 4.6L (2V))IN-VEHICLE SERVICINGENGINE FRONT COVERNOTES
1999 Ford Mustang GT, 2D Convertible, Standard
Engine Front Cover: Notes
1999 Ford Mustang GT, 2D Convertible, StandardSECTION Notes
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL
| Item | Specification |
|---|---|
| Motorcraft Metal Surface Prep ZC-31-A |
- |
| Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (US); Motorcraft SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent |
WSS-M2C930-A |
| Silicone Gasket and Sealant TA-30 |
WSE-M4G323-A4 |
| Item | Part Number | Description |
|---|---|---|
| 1 | N806176 | Power steering pump bolt (3 required) |
| 2 | 3A674 | Power steering pump assembly |
| 3 | 6730 | Oil pan drain plug |
| 4 | W701605 | Oil pan bolt (4 required) |
| 5 | W701725 | Shield bolt |
| 6 | 9G609 | Shield |
| 7 | N808102 | Accessory drive idler pulley bolt |
| 8 | 19A216 | Accessory drive idler pulley |
| Item | Part Number | Description |
|---|---|---|
| 1 | N806177 | Engine front cover bolt (8 required) |
| 2 | N806300 | Engine front cover stud bolt (5 required) |
| 3 | W706508 | Engine front cover bolt |
| 4 | N808586 | Engine front cover bolt |
| 5 | 6D080 | Engine front cover |
| 6 | 6D081 | Engine front cover gasket (3 required) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.