Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1999EXPLORER 4WD V6-4.0L VIN EREPAIR AND DIAGNOSISBODY AND FRAMEROOF AND ASSOCIATED COMPONENTSSUNROOF / MOONROOFSERVICE AND REPAIRROOF OPENING PANEL FRAME
1999 Ford Explorer 4WD V6-4.0L VIN E
Roof Opening Panel Frame
1999 Ford Explorer 4WD V6-4.0L VIN ESECTION Roof Opening Panel Frame
REMOVAL
1. Remove the headliner.
2. Disconnect the roof opening panel motor electrical connector.
3. Remove the roof opening panel frame.
1. Disconnect the four drain hoses.
2. Remove the eighteen screws.
3. Remove the roof opening panel frame.
INSTALLATION
1. To install, reverse the removal procedure.
1. Remove the headliner.
2. Disconnect the roof opening panel motor electrical connector.
3. Remove the roof opening panel frame.
1. Disconnect the four drain hoses.
2. Remove the eighteen screws.
3. Remove the roof opening panel frame.
INSTALLATION
1. To install, reverse the removal procedure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.