Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1998TAURUS V6-3.0L DOHC VIN SREPAIR AND DIAGNOSISWINDOWS AND GLASSWINDOWSWINDOW GLASSSPECIFICATIONS
1998 Ford Taurus V6-3.0L DOHC VIN S
Window Glass: Specifications
1998 Ford Taurus V6-3.0L DOHC VIN SSECTION Specifications
Front Door-Glass Top Run Retaining Screws 7-10 N.m (62-88 Lb-In)
Door window Glass Inner Stabilizer Retaining Nut 7-10 N.m (62-88 Lb-In)
Liftgate Glass Hinge Nuts 5-7 N.m (45-61 Lb-In)
Rear Quarter Window Nuts 3-4 N.m (27-35 Lb-In)
Front Door Glass Top Run Mounting Bolt 7-10 N.m (62-88 Lb-In)
Rear Door Glass Run Mounting Nut 7-10 N.m (62-88 Lb-In)
Rear Quarter Window Retaining Nuts-Wagon 3-4 N.m (27-35 Lb-In)
Door Window Glass Channel Bracket Retainer 4-7 N.m (36-61 Lb-In)
Outer Door Belt Weatherstrip Nuts 1-2 N.m (9-17 Lb-In)
Rear Door Window Stabilizer Screw 9-14 N.m (80-123 Lb-In)
Door window Glass Inner Stabilizer Retaining Nut 7-10 N.m (62-88 Lb-In)
Liftgate Glass Hinge Nuts 5-7 N.m (45-61 Lb-In)
Rear Quarter Window Nuts 3-4 N.m (27-35 Lb-In)
Front Door Glass Top Run Mounting Bolt 7-10 N.m (62-88 Lb-In)
Rear Door Glass Run Mounting Nut 7-10 N.m (62-88 Lb-In)
Rear Quarter Window Retaining Nuts-Wagon 3-4 N.m (27-35 Lb-In)
Door Window Glass Channel Bracket Retainer 4-7 N.m (36-61 Lb-In)
Outer Door Belt Weatherstrip Nuts 1-2 N.m (9-17 Lb-In)
Rear Door Window Stabilizer Screw 9-14 N.m (80-123 Lb-In)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.