Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1998TAURUS V6-3.0L DOHC VIN SREPAIR AND DIAGNOSISWINDOWS AND GLASSWINDOWSWINDOW GLASSQUARTER WINDOW GLASSSERVICE AND REPAIRFIXED
1998 Ford Taurus V6-3.0L DOHC VIN S
Fixed
1998 Ford Taurus V6-3.0L DOHC VIN SSECTION Fixed
REMOVAL
1. Remove quarter trim panel. Doors
WARNING: SAFETY GLASSES AND GLOVES MUST BE WORN. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY.
2. Remove three nut and washer assemblies retaining quarter window glass.
3. Remove quarter window glass.
4. NOTE: It the window Butyl Tape has been damaged, replace with new seal assembly.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten nut and washer assemblies to 3-4 N.m (27-35 Lb-In).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.