Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1998TAURUS V6-3.0L DOHC VIN SREPAIR AND DIAGNOSISSPECIFICATIONSPRESSURE, VACUUM AND TEMPERATURE SPECIFICATIONSREFRIGERANT PRESSURE SENSOR / SWITCH, HVACA/C PRESSURE CUT-OFF SWITCH
1998 Ford Taurus V6-3.0L DOHC VIN S
A/C Pressure Cut-Off Switch
1998 Ford Taurus V6-3.0L DOHC VIN SSECTION A/C Pressure Cut-Off Switch
Compressor Control
Open 2896 kPa (420 psi) Minimum
Close 1724 kPa (250 psi) Maximum
Fan Control
Open 1896 kPa (275 psi)
Close 2241 kPa (325 psi)
Open 2896 kPa (420 psi) Minimum
Close 1724 kPa (250 psi) Maximum
Fan Control
Open 1896 kPa (275 psi)
Close 2241 kPa (325 psi)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.