Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1997TAURUS V8-3.4L VIN N SHOREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSBRAKES AND TRACTION CONTROLSYSTEM SPECIFICATIONS
1997 Ford Taurus V8-3.4L VIN N SHO
System Specifications
1997 Ford Taurus V8-3.4L VIN N SHOSECTION System Specifications
| Front | Diameter | 11.6 Inch (in) | |
| Nominal Thickness | 1.02 Inch (in) | ||
| *Minimum Thickness | 0.974 Inch (in) | ||
| Max Allowable Runout On Vehicle | 0.003 Inch (in) | ||
| Hub Face Maximum Runout | 0.0016 Inch (in) | ||
| Thickness Variation | 0.00035 Inch (in) | ||
| Finish | 15-125 Inch (in) | ||
| Wheel Bearing End Play | 0 Inch (in) | ||
| Rear | Diameter | Inner | 6.73 Inch (in) |
| Outer | 10.1 Inch (in) | ||
| Nominal Thickness | 0.55 Inch (in) | ||
| *Minimum Thickness | 0.5 Inch (in) | ||
| Max Allowable Runout On Vehicle | 0.0004 Inch (in) | ||
| Hub Face Maximum Runout | 0.0016 Inch (in) | ||
| Thickness Variation | 0.0004 Inch (in) | ||
| Finish | 15-125 Inch (in) | ||
| Wheel Bearing End Play | 0 Inch (in) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.