Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1997TAURUS V8-3.4L VIN N SHOREPAIR AND DIAGNOSISBODY AND FRAMELOCKSKEYLESS ENTRYDESCRIPTION AND OPERATIONENTRY CODE
1997 Ford Taurus V8-3.4L VIN N SHO
Entry Code
1997 Ford Taurus V8-3.4L VIN N SHOSECTION Entry Code
The system (permanent) entry code is located in three places:
^ on the owner's wallet code card (in glove compartment)
^ electronically accessible by requesting the remote anti-theft personality module KEYCODE PID on the New Generation Star (NGS) Tester 007-00500 or equivalent.
^ on the remote anti-theft personality module housing The remote anti-theft personality module is programmed at the factory with a five-digit entry code. A replacement remote anti-theft personality module includes replacement labels and a new owner's code card.
To turn on the interior lamps and light all illuminated components:
^ press any button on the keyless entry keypad.
To program a temporary access code:
^ Enter the permanent code on the keyless entry keypad.
^ Press button 1/2 within 5 seconds of last digit of permanent code. (This alerts system to accept temporary code.)
^ Enter alternate five-digit code. Do not exceed 5 seconds between entering digits or between pressing the 1/2 key and entering the first digit.
^ on the owner's wallet code card (in glove compartment)
^ electronically accessible by requesting the remote anti-theft personality module KEYCODE PID on the New Generation Star (NGS) Tester 007-00500 or equivalent.
^ on the remote anti-theft personality module housing The remote anti-theft personality module is programmed at the factory with a five-digit entry code. A replacement remote anti-theft personality module includes replacement labels and a new owner's code card.
To turn on the interior lamps and light all illuminated components:
^ press any button on the keyless entry keypad.
To program a temporary access code:
^ Enter the permanent code on the keyless entry keypad.
^ Press button 1/2 within 5 seconds of last digit of permanent code. (This alerts system to accept temporary code.)
^ Enter alternate five-digit code. Do not exceed 5 seconds between entering digits or between pressing the 1/2 key and entering the first digit.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.