SYS.OK|MANUAL.DB● LIVE
1997 Ford Ranger Base, 2D Pickup, 2.3 A, Automatic

Quick Lookups: Fluids

1997 Ford Ranger Base, 2D Pickup, 2.3 A, AutomaticSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Refrigerant 2.3L Eng 2.06 LBS. 0.93 KG R-134a S
Automatic Transmission Fluid RWD 9.50 QTS. 8.99 L Automatic Transmission Fluid MERCON V S
Brake Fluid N/A N/A MOTORCRAFT High Performance DOT 3 Motor Vehicle Brake Fluid Fill to line on reservoir. S
Differential Gear Oil 2.3L Eng Front,Dana 28 3.00 PTS. 1.41 L 4WD Gear Oil Fill with 48 oz. to bottom of fill hole. S
Differential Gear Oil Rear,Ford Conventional & Traction-Lok 7.5" 5.00 PTS. 2.36 L Premium Rear Axle Gear Oil Fill 1/4" to 9/16" (6 mm to 14 mm) below bottom of fill hole. Add 4 oz. of EST-M2C118-A Friction Modifier. S
Differential Gear Oil Rear,Ford Conventional & Traction-Lok 8.8" 5.00 PTS. 2.36 L Premium Rear Axle Gear Oil Fill 1/4" to 9/16" (6 mm to 14 mm) below bottom of fill hole. Add 4 oz. of EST-M2C118-A Friction Modifier. S
Engine Coolant 2.3L Eng w/Air Cond 7.20 QTS. 6.81 L 50/50 mixture of FORD Premium Cooling System Fluid and water S
Engine Coolant 2.3L Eng w/o Air Cond 6.50 QTS. 6.15 L 50/50 mixture of FORD Premium Cooling System Fluid and water S
Engine Oil 2.3L Eng 5.00 QTS. 4.73 L SAE 5W-20 Premium Synthetic Blend Motor Oil Refer to Engine Oil recommended applications for SAE 5W-20 and 5W-30 motor oils TSB No. 02-1-9. S
Fuel Tank Pickup 16.30 GALS. 61.7 L S
Manual Transmission Fluid 2.80 QTS. 2.64 L MOTORCRAFT Automatic Transmission Fluid MERCON Service refill capacity is determined by filling the Transmission to the bottom of the filler hole with the vehicle on a level surface. S
Power Steering Fluid N/A N/A MOTORCRAFT Automatic Transmission Fluid MERCON V Fill to line on reservoir. S
Windshield Washer Fluid N/A N/A Ultra-Clear Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.