Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Power Window System: Description
Power windows are operated by reversible motors mounted with each window regulator. Each passenger window has an individual switch for separate control. A master switch is located on the driver's door from which both front and rear (if equipped) windows may be controlled. A lock-out switch is incorporated in master switch. When actuated, it prevents window operation from individual switches.
All models are equipped with a one-touch down feature, allowing the driver to lower the left front window fully by momentarily actuating the driver's window down switch at the master power window switch. Holding the switch down longer allows the driver to stop the window as soon as the switch is released. The one-touch down feature is controlled by a Generic Electronic Module (GEM) which incorporates the functions of several different modules into one. The GEM offers diagnostics to locate and repair concerns affecting the subsystem that it controls. The one-touch down feature can only be actuated at the master switch.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.