Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1996RV CUTAWAY 5.8 HREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 42 (HVAC SYSTEM - MANUAL)TORQUE SPECIFICATIONS
1996 Ford RV Cutaway 5.8 H
Torque Specifications
1996 Ford RV Cutaway 5.8 HSECTION Torque Specifications
WARNING: This page is about a different car, the 1996 Ford Pickup, 1996 Ford F-Super Duty, 1996 Ford Cab & Chassis, and 1996 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Compressor Brace-To-Compressor (7.3L) | 30-41 (40-55) | |
| Compressor Brace-To-Engine | 20-32 (28-43) | |
| Compressor Bracket-To-Block (4.9L) | 40-50 (54-70) | |
| Compressor Bracket-To-Head (4.9L) | 30-40 (40-54) | |
| Compressor Discharge-To-Condenser | 15-20 (21-27) | |
| Compressor-To-Bracket (4.9L, 5.0L & 5.8L) | 17-23 (23-310) | |
| Compressor-To-Engine | ||
| 7.3L | 30-41 (40-55) | |
| 7.5L | 17-23 (23-31) | |
| Condenser Mounting Brackets | 10-14 (13-18) | |
| Liquid Line-To-Condenser | 15-20 (21-27) | |
| Manifold-To-Compressor | 13-17 (18-23) | |
| Suction Line-To-Accumulator | 25-32 (34-44) | |
| INCH Lbs. (N.m) | ||
| Pressure Switch | 62-115 (7-13) | |
| Refrigerant Containment Switch | 62-115 (7-13) | |
| Self-Sealing Line Connections | 80 (9) | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.