SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1996RV CUTAWAY 5.8 HREPAIR AND DIAGNOSIS (SINGLE PAGE)GENERAL INFORMATIONMAINTENANCE REMINDER LIGHT (RESET PROCEDURES)ENGINE OIL REPLACEMENT REMINDERENGINE OIL REPLACEMENT REMINDER RESET - PROCEDURE 12WITH MESSAGE CENTER INSTRUMENT CLUSTER
1996 Ford RV Cutaway 5.8 H

With Message Center Instrument Cluster

1996 Ford RV Cutaway 5.8 HSECTION With Message Center Instrument Cluster

Oil Life Reset: 

    NOTE: For 2008 and later vehicles, it may be possible to start with step 2.
  1. Press and release the SETUP button until the message center displays PRESS RESET TO BEGIN SYSTEM CHECK.
  2. Press and release the RESET button until the message center displays HOLD RESET IF NEW OIL.
  3. Press and hold the RESET button for 2 seconds until the message center displays OIL CHANGE SET TO 100%.

Oil Life Start Value Reset 

  1. Press and release the SETUP button until the message center displays OIL LIFE START VALUE SET TO XX%.
  2. Press and release the RESET button to lower the percentage by 10% (down to 10%) for each button press or return the value to 100%.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.