Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1996PICKUP F250, 2D PICKUP, 4.9 Y, STANDARD, M5OD-R2REPAIR AND DIAGNOSIS (SINGLE PAGE)STEERINGSTEERING GEARPOWER STEERING SYSTEM - F150 & F250 LIGHT DUTYPOWER STEERING SPECIFICATIONS
1996 Ford Pickup F250, 2D Pickup, 4.9 Y, Standard, M5OD-R2
Power Steering Specifications
1996 Ford Pickup F250, 2D Pickup, 4.9 Y, Standard, M5OD-R2SECTION Power Steering Specifications
POWER STEERING SYSTEM SPECIFICATIONS
| Description | Specification | |
|---|---|---|
| Steering Type | Recirculating Ball Torsion Bar | |
| Ratio | 17:1 | |
| Turns (Lock-To-Lock) | 3.4 | |
| System Fluid Capacity | 1.6 Pints (.75 L) | |
| Fluid Specification | Motorcraft Mercon® ATF | |
| Worm bearing Preload | .9 INCH Lbs. (8 N. m) | |
| Total Meshload Over Worm Bearing Preload (Maximum) | 4-9 INCH Lbs. (.45-1 N. m) | |
| Power Steering Relief Pressure | 1210-1270 PSI (8343-8756 kPa) | |
| Power Steering Pump | ||
| Minimum Capacity | 1.4 gpm @ 750 PSI | |
| Relief Pressure | 1300-1430 PSI (8963-9860 kPa) | |
| Flow | 2.8-3.2 GPM @ 50 PSI & 2500 RPM | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.