Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Master Switch
Remove power window master switch (leave harness connected). Using a test light, backprobe appropriate wire while actuating power window switch in specified positions. See appropriate MASTER SWITCH TESTING table. If test light illuminates at appropriate switch positions, go to next step. If test light does not illuminate at appropriate switch positions, replace power window master switch.
| Circuit Function | Wire Color | ||
|---|---|---|---|
| Left Front Window Down | White/Black | ||
| Left Front Window Up | Yellow | ||
| Right Front Window Down | White/Yellow | ||
| Right Front Window Up | Tan/Light Blue | ||
| Left Rear Window Down | Gray/Orange | ||
| Left Rear Window Up | Yellow/Light Blue | ||
| Right Rear Window Down | Red/Black | ||
| Right Rear Window Up | Yellow/Black | ||
| Passenger Lock-Out | (1) Red/Light Blue | ||
|
|||
| Circuit Function | Wire Color |
|---|---|
| Left Window Down | White/Black |
| Left Window Up | Yellow |
| Right Window Down | White/Yellow |
| Right Window Up | Tan/Light Blue |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.