Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Retrieving Trouble Codes
Use New Generation Star (NGS) Tester (007-00500) connected to Data Link Connector (DLC), located below instrument panel at right of steering column, to retrieve Diagnostic Trouble Codes (DTCs) and execute self-test diagnostics for Generic Electronic Module (GEM).
If self-test passed and no trouble codes are retrieved, go to appropriate test to continue diagnostics. If DTCs are retrieved, go to appropriate test.
| DTC | Description | Action |
|---|---|---|
| B1302, B1405 | Accessory Delay is Not Timing Out | GO to ACCESSORY DELAY NOT TIMING OUT |
| B1398, B1400, B1404, B1410 | One-Touch Down Feature Inoperative | GO to ONE-TOUCH DOWN FEATURE INOPERATIVE |
| B1302, B1398, B1404, B1405, B1408, B1410, B1478 | Power Windows Completely Inoperative | GO to POWER WINDOWS COMPLETELY INOPERATIVE |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.