Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1996 Ford Crown Victoria V8-4.6L VIN WFACTORY OEM SERVICE PROCEDURE
Test Notes
You should enter this Pinpoint Test only when directed here.
This Pinpoint Test is intended to diagnose the following:
- Constant Control Relay Module (CCRM)
- EEC Power Relay (if contained in CCRM)
- Fuel Pump Relay
- Fan Control/Low Fan Control (FC/LFC) Relay
- High Fan Control (HFC) Relay
- Wide Open Throttle A/C Cutoff (WAC) Relay
- Harness circuits: B+, FR LFP, FPM, FC, LFC, HFC, ACCS, WAC, VPWR (TO CCRM), Power-to-A/C Clutch, Power-to-(Fuel) Pump, Power-to-(Low/High Speed) Fan
- Low Speed Fuel Pump Relay (4.6L 4V Mustang)
- Powertrain Control Module (PCM)
DESCRIPTION
For additional information on the Constant Control Relay Module (CCRM), refer to Description and Operation.
This Pinpoint Test is intended to diagnose the following:
- Constant Control Relay Module (CCRM)
- EEC Power Relay (if contained in CCRM)
- Fuel Pump Relay
- Fan Control/Low Fan Control (FC/LFC) Relay
- High Fan Control (HFC) Relay
- Wide Open Throttle A/C Cutoff (WAC) Relay
- Harness circuits: B+, FR LFP, FPM, FC, LFC, HFC, ACCS, WAC, VPWR (TO CCRM), Power-to-A/C Clutch, Power-to-(Fuel) Pump, Power-to-(Low/High Speed) Fan
- Low Speed Fuel Pump Relay (4.6L 4V Mustang)
- Powertrain Control Module (PCM)
DESCRIPTION
For additional information on the Constant Control Relay Module (CCRM), refer to Description and Operation.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.