Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1996BRONCO 5.0 N, AUTOMATIC, E4ODREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLANTI-LOCK BRAKE SYSTEMDIAGNOSISSYMPTOM TEST B: WHEEL LOCK-UP
1996 Ford Bronco 5.0 N, Automatic, E4OD
Symptom Test B: Wheel Lock-Up
1996 Ford Bronco 5.0 N, Automatic, E4ODSECTION Symptom Test B: Wheel Lock-Up
- ABS valve failure may be caused by defective hydraulic outlet (dump) valve. To correct condition, refer to TEST P: LEFT FRONT OUTLET VALVE (HYDRAULIC) OR SENSOR , TEST Q: RIGHT FRONT OUTLET VALVE (HYDRAULIC) OR SENSOR and TEST R: REAR AXLE OUTLET VALVE (HYDRAULIC) (steps 2 and 3 only) under DTC TESTS .
- A rear brake mechanical failure may be caused by damp or contaminated rear brake linings, stuck or leaking wheel cylinders, rear brakes adjusted to tight, parking brake not releasing or leaking rear axle seal. To correct this condition, inspect rear brakes and repair or replace components as necessary.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.