Quick Lookups: Fluids

1996 Ford Bronco 5.0 N, Automatic, E4ODSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 8.00 OZS. 0.23 L PAG 46 S
Air Cond Refrigerant w/Climate Control 2.13 LBS. 0.96 KG R-134a Due to late changes always refer to A/C specification label. S
Air Cond Refrigerant w/Manual A/C System 2.06 LBS. 0.93 KG R-134a Due to late changes always refer to A/C specification label. S
Automatic Transmission Fluid Trans Mfr CD E4OD 16.20 QTS. 15.33 L Automatic Transmission Fluid MERCON S
Brake Fluid N/A N/A DOT 3 Brake Fluid Fill to line on reservoir. S
Differential Gear Oil Front 3.80 PTS. 1.79 L Hypoid Gear Oil Add 4 oz. of EST-M2C118-A Friction Modifier (C8AZ-19B546-A). S
Differential Gear Oil Rear 5.50 PTS. 2.6 L Hypoid Gear Oil Add 4 oz. of EST-M2C118-A Friction Modifier (C8AZ-19B546-A). S
Engine Coolant 5.0L Eng,Automatic Trans w/Standard Cooling 14.00 QTS. 13.24 L 50/50 mixture of FORD Premium Cooling System Fluid and water S
Engine Coolant 5.0L Eng w/Air Cond,w/Super Cooling 15.00 QTS. 14.19 L 50/50 mixture of FORD Premium Cooling System Fluid and water S
Engine Coolant 5.0L Eng w/Air Cond 14.00 QTS. 13.24 L 50/50 mixture of FORD Premium Cooling System Fluid and water S
Engine Oil w/Filter 6.00 QTS. 5.67 L SAE 5W-20 Premium Synthetic Blend Motor Oil Refer to Engine Oil recommended applications for SAE 5W-20 and 5W-30 motor oils TSB No. 02-1-9. S
Engine Oil w/o Filter 5.00 QTS. 4.73 L SAE 5W-20 Premium Synthetic Blend Motor Oil Refer to Engine Oil recommended applications for SAE 5W-20 and 5W-30 motor oils TSB No. 02-1-9. S
Fuel Tank 32.00 GALS. 121.13 L S
Manual Transmission Fluid 3.80 QTS. 3.59 L Automatic Transmission Fluid MERCON S
Power Steering Fluid N/A N/A FORD Premium Power Steering Fluid or equivalent S
Transfer Case Fluid 2.00 QTS. 1.89 L Automatic Transmission Fluid MERCON S
Windshield Washer Fluid 2.80 QTS. 2.64 L Ultra-Clear Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.