SYS.OK|MANUAL.DB● LIVE
1994 Ford Ranger Splash, 2D Pickup Extra Cab, 2.3 A

Quick Lookups: Fluids

1994 Ford Ranger Splash, 2D Pickup Extra Cab, 2.3 ASECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 7.00 OZS. 0.2 L PAG 46 S
Air Cond Refrigerant 1.38 LBS. 0.62 KG R-134a S
Automatic Transmission Fluid RWD 9.70 QTS. 9.17 L Automatic Transmission Fluid MERCON S
Brake Fluid N/A N/A MOTORCRAFT High Performance DOT 3 Motor Vehicle Brake Fluid Fill to line on reservoir. S
Differential Gear Oil Rear,Ford Conventional & Traction-Lok 7.5" 5.00 PTS. 2.36 L FORD Hypoid Gear Oil Fill 1/4" to 9/16" (6 mm to 14 mm) below bottom of fill hole. Add 4 oz. of EST-M2C118-A Friction Modifier. S
Differential Gear Oil Rear,Ford Conventional & Traction-Lok 8.8" 5.30 PTS. 2.5 L FORD Hypoid Gear Oil Fill 1/4" to 9/16" (6 mm to 14 mm) below bottom of fill hole. Add 4 oz. of EST-M2C118-A Friction Modifier. S
Engine Coolant 2.3L Eng w/Air Cond 7.20 QTS. 6.81 L 50/50 mixture of FORD Premium Cooling System Fluid and water S
Engine Coolant 2.3L Eng w/o Air Cond 6.50 QTS. 6.15 L 50/50 mixture of FORD Premium Cooling System Fluid and water S
Engine Oil 2.3L Eng 5.00 QTS. 4.73 L SAE 5W-20 Premium Synthetic Blend Motor Oil Refer to Engine Oil recommended applications for SAE 5W-20 and 5W-30 motor oils TSB No. 02-1-9. S
Fuel Tank Pickup Extra Cab 19.60 GALS. 74.19 L S
Manual Transmission Fluid 5.60 PTS. 2.64 L Automatic Transmission Fluid MERCON S
Power Steering Fluid N/A N/A Automatic Transmission Fluid Type F Fill to line on dipstick. S
Windshield Washer Fluid N/A N/A Ultra-Clear Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.