Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1994RANGER SPLASH, 2D PICKUP EXTRA CAB, 2.3 AREPAIR AND DIAGNOSISENGINE PERFORMANCEREMOVE, OVERHAUL & INSTALLENGINE CONTROLS - REMOVE/INSTALL/OVERHAULTORQUE SPECIFICATIONS
1994 Ford Ranger Splash, 2D Pickup Extra Cab, 2.3 A
Torque Specifications
1994 Ford Ranger Splash, 2D Pickup Extra Cab, 2.3 ASECTION Torque Specifications
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Fuel Supply Manifold Bolts | ||
| 2.3L | 15-22 (20-30) | |
| 3.0L & 4.0L | 7-10 (10-14) | |
| Lower Intake Manifold Bolts | ||
| 2.3L | 15-22 (20-30) | |
| 3.0L | 24 (32) | |
| 4.0L | 15-18 (20-24) | |
| O2 Sensor | 30 (41) | |
| CMP Synchronizer Hold Down Bolt | 14-21 (19-28) | |
| Throttle Body-To-Manifold Bolts | ||
| 2.3L | 12-18 (16-24) | |
| 3.0L & 4.0L | 6-9 (8-12) | |
| Upper Intake Manifold Bolts | ||
| 2.3L & 3.0L | 15-22 (20-30) | |
| 4.0L | 15-18 (20-24) | |
| INCH Lbs. (N.m) | ||
| CMP Sensor Screws | 22-31 (2.5-3.5) | |
| Crankshaft Position Sensor Bolts | ||
| 2.3L | 22-31 (2.5-3.5) | |
| 4.0L | 75-106 (9-12) | |
| Fuel Pressure Regulator Bolts | ||
| Except 4.0L | 27-40 (3-4.5) | |
| 4.0L | 71-98 (8-11) | |
| Fuel Supply Manifold Bolts | 72-84 (8-11) | |
| Pressure Relief Valve Cap | 4-6 (.5-.7) | |
| Thermostat Housing Bolts | 71-98 (8-11) | |
| Throttle Position Sensor Screws | ||
| 2.3L | 25-34 (2.8-3.8) | |
| 3.0L | 13 (1.5) | |
| 4.0L | 11-16 (1.2-1.8) | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.