SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1994F 250 2WD PICKUP V8-351 5.8LREPAIR AND DIAGNOSISBRAKES AND TRACTION CONTROLDISC BRAKE SYSTEMDIAGRAMSHEAVY DUTY
1994 Ford F 250 2WD Pickup V8-351 5.8L

Heavy Duty

1994 Ford F 250 2WD Pickup V8-351 5.8LSECTION Heavy Duty






Front Brake System:






ITEM PART DESCRIPTION
NUMBER

1 3105 Front Wheel Spindle (RH)

2 2C150 Caliper Support Pin Assembly

3 2B120 Front Disc Brake Caliper

4 2B160 Front Brake Splash Shield Gasket

5 2K004 Front Disc Brake Rotor Shield (RH)

6 N611171-S2 Screw, 7-10 Nm
(62-89 in lb)

7 1190 Wheel Hub Grease Seal

8 4221 Inner Differential Bearing

9 1102 Front Disc Brake Hub and Rotor

10 1012 Wheel Hub Bolt Nut

11 1216 Front Wheel Bearing Outer Cone and
Roller

12 1195 Front Wheel Outer Bearing Retainer
Washer

13 374504 Nut, 3/4-16

14 390622-S Nut, Retainer 3/4

15 N642569-S36 Cotter Pin, must be installed as
shown

16 1131 Hub Grease Cap

17 2B164 Disc Brake Pad Anti-Rattle Clip

A 2C150 Pins must be installed so that the
retention tabs are touching spindle
surface, not the caliper surface (4
places). Pins may be installed from
either direction.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.