Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1994F 150 4WD PICKUP V8-351 5.8LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYSYSTEM SPECIFICATIONS
1994 Ford F 150 4WD Pickup V8-351 5.8L
System Specifications
1994 Ford F 150 4WD Pickup V8-351 5.8LSECTION System Specifications
A/C Compressor To Bracket 18-22 ft lb
Alternator 30-40 ft lb
Alternator Pivot Bolt 40-50 ft lb
Camshaft Sprocket Retaining Bolt 40-45 ft lb
Camshaft Thrust Plate 9-12 ft lb
Clutch Housing Or Transmission To Engine 40-50 ft lb
Connecting Rod Cap 40-45 ft lb
Crankshaft Damper 70-90 ft lb
Cylinder Head [01]
Distributor 17-25 ft lb
Exhaust Manifold 18-24 ft lb
Fan Shroud Bolts 5-6 ft lb
Flywheel To Crankshaft 75-85 ft lb
Front Cover 12-18 ft lb
Intake Manifold 23-25 ft lb
Intake Manifold Pipe Fittings 12-18 ft lb
Intake Manifold Vacuum Fittings 6-10 ft lb
Main Bearing Cap 95-105 ft lb
Oil Inlet Tube To Main Bearing Cap 22-32 ft lb
Oil Inlet Tube To Pump 10-15 ft lb
Oil Pan Bolts 9-11 ft lb
Oil Pump Retaining Bolts 22-32 ft lb
Power Steering Pump To Bracket 30-40 ft lb
Pulley To Damper 40-50 ft lb
Radiator Mounting Bolts 10-15 ft lb
Rocker Cover 10-13 ft lb
Rocker Arm Fulcrum Bolt 18-24 ft lb
Spark Plug 10-15 ft lb
Thermactor Pump 30-40 ft lb
Thermactor Pump Bracket To Block 30-45 ft lb
Thermactor Pump Bracket To Head (3/8-16 Bolt) 30-40 ft lb
Thermactor Pump Bracket To Head (7/16-14 Bolt) 40-50 ft lb
Thermactor Pump Pivot Bolt 30-40 ft lb
Upper To Lower Intake Manifold 12-18 ft lb
Water Outlet Housing 9-12 ft lb
Water Pump Retaining Bolts 12-18 ft lb
[01] -- Refer to Cylinder Head, for tightening procedure.
Alternator 30-40 ft lb
Alternator Pivot Bolt 40-50 ft lb
Camshaft Sprocket Retaining Bolt 40-45 ft lb
Camshaft Thrust Plate 9-12 ft lb
Clutch Housing Or Transmission To Engine 40-50 ft lb
Connecting Rod Cap 40-45 ft lb
Crankshaft Damper 70-90 ft lb
Cylinder Head [01]
Distributor 17-25 ft lb
Exhaust Manifold 18-24 ft lb
Fan Shroud Bolts 5-6 ft lb
Flywheel To Crankshaft 75-85 ft lb
Front Cover 12-18 ft lb
Intake Manifold 23-25 ft lb
Intake Manifold Pipe Fittings 12-18 ft lb
Intake Manifold Vacuum Fittings 6-10 ft lb
Main Bearing Cap 95-105 ft lb
Oil Inlet Tube To Main Bearing Cap 22-32 ft lb
Oil Inlet Tube To Pump 10-15 ft lb
Oil Pan Bolts 9-11 ft lb
Oil Pump Retaining Bolts 22-32 ft lb
Power Steering Pump To Bracket 30-40 ft lb
Pulley To Damper 40-50 ft lb
Radiator Mounting Bolts 10-15 ft lb
Rocker Cover 10-13 ft lb
Rocker Arm Fulcrum Bolt 18-24 ft lb
Spark Plug 10-15 ft lb
Thermactor Pump 30-40 ft lb
Thermactor Pump Bracket To Block 30-45 ft lb
Thermactor Pump Bracket To Head (3/8-16 Bolt) 30-40 ft lb
Thermactor Pump Bracket To Head (7/16-14 Bolt) 40-50 ft lb
Thermactor Pump Pivot Bolt 30-40 ft lb
Upper To Lower Intake Manifold 12-18 ft lb
Water Outlet Housing 9-12 ft lb
Water Pump Retaining Bolts 12-18 ft lb
[01] -- Refer to Cylinder Head, for tightening procedure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.