System Specifications

Air Conditioning Compressor 18-23 ft lb
Alternator 30-40 ft lb
Alternator Bracket To Engine [02]
Alternator Pivot Bolt 39-53 ft lb
Camshaft Thrust Plate 12-18 ft lb
Connecting Rod Cap 40-45 ft lb
Cylinder Head [01]
Damper Or Pulley 130-150 ft lb
Distributor 17-25 ft lb
Engine To Transmission Bolts 40-50 ft lb
Exhaust Manifold 22-32 ft lb
Exhaust Pipe To Manifold 25-38 ft lb
Fan Blade To Fan Clutch 12-18 ft lb
Fan Clutch To Water Pump 30-100 ft lb
Fan Shroud Bolts 53-71 in lb
Flywheel To Crankshaft 75-85 ft lb
Front Cover 12-18 ft lb
Fuel Filter 7-8 ft lb
Fuel Pump 12-18 ft lb
Intake Manifold 22-32 ft lb
Intake Manifold To Exhaust Manifold Attaching Nuts 22-32 ft lb
Intake Manifold Vacuum Fitting 6-10 ft lb
Main Bearing Cap 60-70 ft lb
Oil Drain Plug 15-25 ft lb
Oil Filter Adapter To Cylinder Block 40-50 ft lb
Oil Filter Insert To Cylinder Block 15-35 ft lb
Oil Inlet Tube To Main Bearing Cap 22-32 ft lb
Oil Inlet Tube To Pump 10-15 ft lb
Oil Pan 15-18 ft lb
Oil Pump Retaining Bolts 10-12 ft lb
Power Steering Pump 30-40 ft lb
Power Steering Pump/A/C Compressor Bracket To Block 30-40 ft lb
Power Steering Pump/A/C Compressor Bracket To Head 39-53 ft lb
Pressure Plate & Cover To Flywheel 12-18 ft lb
Pulley To Damper Bolt 35-50 ft lb
Rocker Cover 6-9 ft lb
Rocker Shaft Support 17-23 ft lb
Spark Plug 10-15 ft lb
Thermactor Air Manifold 14-16 ft lb
Thermactor Pump 30-40 ft lb
Thermactor Pump Pulley To Pump Hub 9-11 ft lb
Throttle Body 14-20 ft lb
Timing Cover Attaching Bolts 15-22 ft lb
Valve Pushrod Cover To Cylinder Block 25-35 in lb
Valve Stud Nut 17-23 ft lb
Water Pump Retaining Bolts 12-18 ft lb

[01] -- Refer to Cylinder Head for tightening procedure.
[02] -- Except bottom bolt, 30-40 ft lb, bottom bolt, 39-53 ft lb.