Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1994ASPIRE SE, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSFLUIDS
1994 Ford Aspire SE, Automatic
Quick Lookups: Fluids
1994 Ford Aspire SE, AutomaticSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 6.00 OZS. | 0.17 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.56 LBS. | 0.7 KG | R-134a | S | |||
| Automatic Transmission Fluid | 6.00 QTS. | 5.67 L | Automatic Transmission Fluid MERCON | S | |||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | Fill to line on reservoir. | S | ||
| Engine Coolant | w/Air Cond | 6.30 QTS. | 5.96 L | 50/50 mixture of FORD Premium Cooling System Fluid and water | S | ||
| Engine Coolant | w/o Air Cond | 5.80 QTS. | 5.48 L | 50/50 mixture of FORD Premium Cooling System Fluid and water | S | ||
| Engine Oil | w/Filter | 3.60 QTS. | 3.4 L | SAE 5W-30 | S | ||
| Engine Oil | w/o Filter | 3.30 QTS. | 3.12 L | SAE 5W-30 | S | ||
| Fuel Tank | 10.00 GALS. | 37.85 L | S | ||||
| Manual Transmission Fluid | 2.60 QTS. | 2.46 L | Automatic Transmission Fluid MERCON | S | |||
| Power Steering Fluid | 2.00 QTS. | 1.89 L | Automatic Transmission Fluid Type F | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.