AOD-E & AXOD-E Transaxle Shift Relearn Procedure

1993 Ford Pickup F250, 2D Pickup, 5.0 N, Standard, M5OD-R2SECTION AOD-E & AXOD-E Transaxle Shift Relearn Procedure
WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 1994 Mercury Villager, 1994 Mercury Topaz, 1994 Mercury Sable, 1994 Mercury Grand Marquis, and 1994 Mercury Cougar. However, it is still accessible from the selected car via links, so may be relevant.

With transaxle gear selector in Overdrive, moderately accelerate vehicle to 50 MPH for a minimum of 15 seconds. Transaxle should be in 4th gear. While holding speed steady, lightly apply and release brake for about 5 seconds. Stop and park vehicle for at least 20 seconds with gear selector in Drive. Repeat procedure 5 times.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.