Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Section 10 (Engine Controls - Self-Diagnostics - EEC-IV - Gasoline): Summary
If no service code or Code 11 or 111 (pass code) is present, but drive-ability problem still exists, proceed to EEC-IV DIAGNOSIS BY SYMPTOM table. If driveability problem still cannot be located, go to appropriate TESTS W/O CODES article for diagnosis by symptoms or intermittent diagnostic procedures.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.