Quick Lookups: Fluids

1993 Ford Pickup F250, 2D Pickup, 5.0 N, Standard, M5OD-R2SECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Refrigerant 2.81 LBS. 1.27 KG R-12 S
Brake Fluid N/A N/A MOTORCRAFT High Performance DOT 3 Motor Vehicle Brake Fluid Fill to line on reservoir. S
Differential Gear Oil F250,F350 Ford Conventional and Traction-Lok Differential,Semi and Ful 7.50 PTS. 3.54 L Rear Axle Gear Oil Add 4 oz. of EST-M2C118-A Friction Modifier (C8AZ-19B546-A). S
Engine Coolant F150,F250,5.0L Eng,Standard Trans Standard Cooling 15.70 QTS. 14.85 L 50/50 mixture of FORD Premium Cooling System Fluid and water S
Engine Coolant F150,F250,5.0L Eng w/Air Cond 16.40 QTS. 15.52 L 50/50 mixture of FORD Premium Cooling System Fluid and water S
Engine Coolant F150,F250,5.0L Eng w/Super Cooling or Super Cooling w/A/C 18.30 QTS. 17.31 L 50/50 mixture of FORD Premium Cooling System Fluid and water S
Engine Oil 5.0L Eng w/Filter 6.00 QTS. 5.67 L SAE 5W-20 Premium Synthetic Blend Motor Oil Refer to Engine Oil recommended applications for SAE 5W-20 and 5W-30 motor oils TSB No. 02-1-9. S
Engine Oil 5.0L Eng w/o Filter 5.00 QTS. 4.73 L SAE 5W-20 Premium Synthetic Blend Motor Oil Refer to Engine Oil recommended applications for SAE 5W-20 and 5W-30 motor oils TSB No. 02-1-9. S
Fuel Tank F250,Pickup,RWD,133 IN. WB,Gas Front 19.00 GALS. 71.92 L S
Fuel Tank F250,Pickup,RWD,133 IN. WB Rear 18.20 GALS. 68.89 L S
Manual Transmission Fluid 5 Spd Trans Overdrive,Mazda R2 3.80 QTS. 3.59 L Automatic Transmission Fluid MERCON S
Power Steering Fluid N/A N/A Automatic Transmission Fluid Type F S
Transfer Case Fluid F150,F250 2.00 QTS. 1.89 L Automatic Transmission Fluid MERCON S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.