SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1993PICKUP F250, 2D PICKUP, 5.0 N, STANDARD, M5OD-R2REPAIR AND DIAGNOSIS (SINGLE PAGE)MAINTENANCEPROCEDURESMAINTENANCE REMINDER LIGHT (RESET PROCEDURES)ENGINE OIL REPLACEMENT REMINDERENGINE OIL REPLACEMENT REMINDER RESET - PROCEDURE 25HIGH SERIES CLUSTER
1993 Ford Pickup F250, 2D Pickup, 5.0 N, Standard, M5OD-R2

High Series Cluster

1993 Ford Pickup F250, 2D Pickup, 5.0 N, Standard, M5OD-R2SECTION High Series Cluster

Use the information display controls on the steering wheel to reset the oil change indicator.

From the main menu scroll to:

  • Truck Info
    1. Press the down arrow button, then from this menu scroll to the following message.
  • Maintenance Monitor
    1. Press the OK button.
  • Oil Life: xxx%
    1. Press the down arrow button, then from this menu scroll to the following message.
  • Oil Life
    1. Press the OK button.
  • Oil Life Hold OK to Reset
    1. Press and hold the OK button until the instrument cluster displays the following message.
    2. Oil Life: 100%
    3. When the oil change indicator resets, the instrument cluster displays 100%.
    4. Repeat the process if the oil change indicator does not reset.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.